Bio Gene Fume Hoods are designed to ensure good working condition by protecting from toxic fumes. Vapours, dust, chemical spillage, Over run of reaction, Flames. Bio Gene  uses  very powerful exhaust fan blower to suck the contamination and dispose along  with water curtain.

  • Applications
  • Features
  • Control
  • Construction
  • Specification

Bio Gene Fume Hood is widely used in Research Centers, Major Universities, Pharmacy, Biotechnology, Medical research, Hospital, Diagnostics, Agriculture science, Pharmacology, Immunology, Genetics, Bioengineering Biotechnology, Microbiology, Botany, Zoology etc.

  • Ergonomic Design
  • Energy Efficient Mechanism
  • Low Noise Levels
  • 18 Gauge electro galvanized sheet with epoxy polyester power coating.
  • A Stable non –Adjustable baffle with a single slot on the back baffle to aid in distributing the flow of air into and through the hood. The baffle spaced out from the back liner and removal for cleaning.
  • 6mm thick FRP Bisphenol ‘1’ Fumerate
  • BIO GENE Fume Hood are designed for Durable, Hazardous Chemical Gas Removal / vapour
  • Wide variety of Material for User Selection
  • Slide Type Door with acrylic /Tempered Safety Glass
  • Powerful exhaust Fan Blower
  • Toxic particps odors to improve
  • Built-In Utility cabinet
  • Application based work platform, Stainless steel as per your requirement.
  • ASHRAE 110 and EN 14175 tested at face
  • Blower speed control.
  • ISO , CE, EN 60601:01
  • Bio Gene fume hood the sash of glass with vertical rising frame. The bottom of the sash frame has a full length handle. The sash is counterbalanced with a weights 5mm toughened glass sash.
  • 18±1 mm thick Dished Black Granite top with skirting.
  • Data Cable design general purpose twin cabinets fabricated out of GI sheet, consisting of-twin doors in double walls const.
  • flushed type recessed handle.
    -90º special design doors hingers in AI alloy const. Chemical resistant FRP Linning inside the cabinets wall.
    -recessed base frame in heavy duty GI const.
    -twin constors for easy removal of the cabinets.
  • Fabricated out of Mild Steel covered with FRP.
  • These are designed so as to throw-out all toxic/harmful vapors, thus protecting costly instruments and the person working in the lab.
  • Fume hood hood working area, of gases, vapour, toxic particles, odour
  • Inner Working Table made of stainless steel 
  • Working table top is made of stainless steel and a small wash basin with connections provided for inlet and outlast of water.
  • Bio gene fume hood standard design.
  • The front door moves vertically up and down with concealed counter balanced weight.
  • The unit is fitted with Dual fluorescent light and a gas cock for gas/air supply. Metal dad fluorescent light metal clad socket 02 Nos and gas cock etc.
  • The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light.
  • To work on 220/230 volts A.C. Supply. 50 Hz AC
  • Control panel design on/off toggle switches for mains, motor – blower and tube light and main indicator.
  • Designed to minimize static pressure loss with adequate slot area and bell shaped exhaust collar configuration. Maximum average static pressure loss readings taken three diameters above the hood outlet from four points, 90 degrees, shall not exceed the following maximums with sash in full open position.
  • Steel: High quality,
  • cold rolled,  mild steel meeting requirements of
  • ASTM A1008; gauges U.S. Standard and galvanized.
  • Bio gene fume hood working table is heavy gauge stainless steel, sink, 02Nos
  • Ceiling closure panels. 
  • Xeric or Safety glass: 7/32" thick laminated safety glass or 3/8” thick
  • laminated safety glass viewing panel
  • Sash pull: Full width corrosion resistant steel with chemical resistant powder coating. Maximum 3mm” thick.
  • Gaskets: White 70 durometer PVC for interior access panels.
  • Gasket interior access panels to eliminate air leakage and to retain liquids inside hood.
  • Fume hood liner: Poly resin Reinforced polyester panel; smooth finish and IVORY/BLUE in final appearance. 
  • Apparatus storage has base cabinet with MS Power coated self and double skinned door.
  • The blower is made PP-FRP dulvin type for effective exhaust of harmful gases and vapors.
  • 3 Phase 1HP 2800 TEFC branded moter suction Capacity 800-1000 cfm (At different sash position)
  • The Impeller of PP-FRP construction. As per IS 325
  • Electrical services: Three wire grounding type receptacles rated at
  • 120 V.A.C. at 20 amperes. Provide. Flush plates:
  • Black acid resistant thermoplastic
    ⇒ Granite work surface
    ⇒ Standard Base Cabinet
    ⇒ Exhaust blower
    ⇒ Airflow monitor
    ⇒ Nitrogen valve
    ⇒ nstallation of
    ⇒ Fume Hood/blower mounting etc



Model BTI FH1000 FH1200 FH1500 FH1800
External Size (W*D*H) 1000*750*2320mm 1200*800*2345mm 1500*800*2345mm 1800*800*2345mm
Internal Size (W*D*H) 820*620*750mm 1020*670*750mm 1320*670*750mm 1620*670*750mm
Work Surface Height 850mm
Max Opening 520mm 570mm 570mm 570mm
Air Velocity 0.3~0.8m/s
Protection Class Class I
Protection Type IP 20
Noise ≤60 dB
Exhaust Duct PVC, Standard length: 4 meters.
Pipe Strap 1 pc
Fluorescent Lamp 14W*1 21W*1 28W*1 36W*1
UV Lamp Emission of 253.7 nanometers for most efficient decontamination
Blower Built-in centrifugal blower; Speed adjustable.
Front Window 5mm toughened glass; Motorized; Height adjustable.
Power Supply 220V/ 50Hz; 220V/ 60Hz; 110V/60Hz
Consumption 400W 400W 500W 500W
Material Exterior Cold-rolled steel with anti-bacteria powder coating.
Interior High grade melamine board with good acid and alkali resistance function
Work table Solid chemical resistant phenolic resin
Standard Accessory UV lamp*2, Fluorescent lamp, Water tap, Gas tap, Water sink, Base cabinet, Pipe strap.
Total load of 2 waterproof sockets: 500W
4 meters PVC exhaust duct
Optional Accessory Active carbon filter
Gross Weight 272kg 302kg 331kg 366kg
Package Main Body 1150*900*1870 mm 1350*950*1920 mm 1650*950*1890 mm; 1950*950*1900 mm
Base Cabinet 1150*900*960 mm 1350*950*900 mm 1650*960*910 mm 1950*960*910 mm
An ISO 9001Certified EC, EU