Walk In Stability Chamber
Enquiry
Submit

BioGene defines the Stability test as creating the test conditions where the samples, product, are subjected to endurance test for Heat, Cold, Dryness, Humidity and its effects by stimulating the conditions artificially and thus getting the results to make the Quality Assurance observation.

Photostability test under 25˚C  ±2˚C @ 60rh±5%  and  accelerated test at 40˚C ±2Y@75%rh in BioGene stability assure a rapid change effect, gradient in electrical electronic, semi conducts automobile ports  using the ESS Environmental Stress Screening  test method. Fanthom, better endurance results thereby compling to the story regulations of International Standards.

  • Applications
  • Features
  • Control
  • Construction
  • Specification

Walk in chamber’s allows the user to have an advantage in stability Environment test due to persuit of reliability in speedy test results in given time from work with reliable repeat performance of products for durability performance before the product market launch.

  • Walk in  Stability 
  • Large Touch Screen Control’s Display
  • 21 CFR port 11  software
  • Prefabricated PUF Panels
  • CAM Hinge Locking Device
  • French Compressor 
  • Data Transfer RS 485 or WiFi
  • Temperature: -5˚C- 60˚C
  • Standards : ICH-Q1AR2
  • ISO – 13485 Standards,
  • EN 61000-6-3 : 2001
  • EN: 60101
  • IEC – 60068-2-1 COLD
  • IEC – 60068-2-2 Dry Heat
  • IEC – 60068-2-14 Temperature change
  • IEC – 60068-2-38
  • Prefabricated Panel with CAM locks
  • Large 7”/9” LCD Display
  • Touch Screen Controls
  • Inner Stainless Steel or Polypropylene
  • Forced Air Circulation
  • French cooling unit
  • Large Door
  • Flexible Storage system
  • Safety Alarm
DESCRIPTION  BTI-WSC-35 BTI- WSC-60 BTI- WSC-150 BTI- WSC-220
Temperature Range on -5°C to 60°C
Temperature Range Lights On 5°C to 55°C.
display Digital
Temp. Deviation Between +1°C @ =+25°C @ 80% RH ( lights off )
Temperature Uniformity +2°C @ +25° c @ 80% RH ( lights off )
Temperature Control +/- 0.1° c deg.
Temperature uniformity +2°C @ 25°C @ 80% RH (Lights off)
Temperature sensor PT-100 Ω RTD
Humidity range 5 % RH to 90% RH
Humidity deviation 3% RH
Humidity uniformity + 5% RH
Humidity control accuracy ± 1%
Interior construction SS 304
Exterior Construction CRCA Powder coated.
   
Construction Panel Type PUFF Insulation for better thermal insulation.
Electrical 220 to 240 volts/ 50 Hz.
Alarm High and low
Light Intensities @ 25 °C
Size 1500 x 1500 x 1500 mm 1500 x 2000 x 2000 mm 2500 x 2500 x 2500 mm 3500 x 2500 x 2500 mm
Capacity 3500 ltrs 6000 ltrs 15600 ltrs 22000 ltrs
An ISO 9001Certified EC, EU