ice flaking machine 80 100 kg

Microprocessor based System with

• LED Indicator 
• On-off
• Run
• Fault
• Ice full
• Water low

POSITIVE CHARGE NON RETURN DEVICE

• Contamination Free positive charge non return Device of 0.45um used for Feed Water inlet in our ice making Machine.
• It is a compact, self contained unit, covering less floor area easily installable Ice Flakers machine.
• Automatic Water cut off in case of no water supply /Low pressure supply of water through proximity sensors. 
• Quality compressor & Air Cooled condensation.
• CFC/HCFC Free. (R134A) is Used in Ice flaking machine.
• Corrosion frees Interior.(Stainless steel)
• Electric shock protection- I Class, Overload protector MCB fir motor & Refrigeration Unit.

• Microprocessor Based
• Automatic Ice Flake
• Automatic water cut off
• Class I Protection
• Power Breaker
• Ice level Controller

HOUSING

• Ice flakers machine is housed
• In Stainless Steel body Inner and the outer Shell Staleness Steel which can have a Hardness Average of 70 -75 %.
• The Bin is Made of Stainless Steel with no Chances of corrosion duly lined.
• Stainless steel internal & external body.

PRODUCTION CAPACITY

• Bio Gene Ice Flaking machine
• Ice Flaking Model is designed to produce on an average a production in   depending upon the Electrical & water Condition Inputs hours.
• Bin sensor stop ice production for better sanitation.

ICE FLAKE BIN

• Bin capacity range from 10 -150 kgs depending on models 
• This bin also has a drain at the bottom to remove the condensed water.
• The storage bin has a sliding door.

Ice Making Cum Flaking

• The unique design ensures through its powerful compressor to convert the running water to form Ice which is crushed to form FLAKES or 3-5 mm thickness continuously.

INSULATION

• Thick PUF Insulation of ensures no thermal loss.

ICE CRUSHER 

• Ice crusher used is GERMAN CRUSHER made of Stainless Steel to Give lifelong performance for continued Water introduction into Crusher.

PRECISION FLOAT VALVE

• Assembly through a Precision float Valve. The inflow of water is smoothly controlled by this float valve for maintaining a required level of water irrespective of variation in pressure at the Water input line.

ICE FLAKES

• Produced are of 3-5mm thickness Crashed by the Ice Crusher
• Ice flakes are collected into a well insulated/ (PUF)
• Stainless steel Container. So It stays for longer time.
• Thermostat controls for ice Flakes size and storage bin ice level sensor. 
• The removal of flakes is Easily carried out by the means of Spade. Possible through the stainless steel Top door which can be pushed while Removing the ice.

ICE LEVEL CONTROLLER

• The equipment fitted with an ICE LEVEL CONTROLLER which will put off the system in case ice gets accumulated in the container more Than The required level. Hence, there is no need of an operator being on the Machine all the time. 

COMPRESSOR

• Bio Gene Ice Flakers has an efficient design to house the compressor Hermetically sealed at the bottom of the Machine; the compressors are Imported in origin from Europe.
• Refrigerant: R134A  CFC FREE
• Condenser unit: AIR COOLED
• ALL BODY STAINLESS STEEL

Freezing Unit

Bio Gene understands the need of Clean Atmosphere hence the entire unit is made of Stainless Steel.

• NOISE LEVEL : > 65 dbk
• Bin made by: Stainless Steel.