Muffle Furnace 1200 Deg. C

• For models of higher temperature the maximum temp. 1200ºC and working temp. 1150ºC. 
• Units with maximum working range upto 1150ºC are fitted with coil type heaters embedded in grooved refractory for supporting the heating elements on four sides.
• Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic Insulation.
• Built in over temperature alarms for safety.
• Heavy duty double layer structure with cooling fan.  Lower temperature in outside case.
• Bio Gene Muffle furnace provision for the furnace may be operated by PC with a control.
• INSULATION: - high quality ceramic fiber blankets.
• Non rust textured steel casing
• WATER COOLING :- Efficient water cooling provide at the end fittings of the furnace tube to protect the ‘O’ rings.
• PROGRAMMER CONTROLLER :- A digital programmable controller is capable of storing programs each having at least 8 segments. The temperature controller accuracy of ±1ºC.
• VACUUM PUMP:- A suitable vacuum pump integrated to the furnace provide.
• Additional heating element :- 4nos
• Additional thermo couple (R-type_ :- 1nos.

• Microprocessor Based Programmable controls
• Time :- 0-99/999 Min
• Door Lock :- lockable
• Alarm : Temperature Timer
• Process: Start. End
• EN: 60601 : 1
• EMD : 93/42/EEC

TEMPERATURE CONTROL
Temperature control unit can be separated from furnace, and make moving at easy.

PID CONTROL
PID Control via current limiting phase angle fired the resistor, E.G. SCR (Silicon Controlled rectifier) Eurothem or equivalent with minimum 8 segment (ramp + dwell). 

Bio Gene Muffle furnace is double walled construction Inner chamber is made of Ceramic pot. 

Bio Gene Muffle furnace is constructed out of Mild Steel sheet. With cooling  fan observation window. Temperature controlled by energy regulator with indicator And Two temperature probes.

INSULATION
The gap between the walls is filled high-grade CERAMIC INSTULATION, which ensures maximum thermal efficiency in our Bio Gene Furnace.

HEATING ELEMENTS
Fitted on both sides for uniform heating. 

OBSERVATION WINDOW
0.5” Diameter observation window made of quartz glass allow user to see insider chamber during heating operation.

THERMOCOUPLE
Thermocouple installed for immediate use along with silent solid state power control relays.