Conditioning Chamber Manufacturer - Biotechnologies Inc.

Environmental Conditioning Chambers for Temperature & Humidity Testing

At Biotechnologies Inc., we specialize in manufacturing state-of-the-art conditioning chambers that deliver highly precise temperature and humidity environments for a wide range of testing applications. Designed for research laboratories, product development facilities, and industrial testing units, our chambers are ideal for preconditioning, stability studies, accelerated aging tests, and material behavior analysis.

Engineered with advanced ultrasonic humidification systems, ±0.1°C temperature accuracy, and programmable multi-cycle controls, our Conditioning Chambers ensure consistent, repeatable, and globally compliant test results. Built with SS 304 stainless steel interiors and a durable MS powder-coated exterior, these chambers combine robust construction with energy efficiency, making them a long-term investment for demanding industries.

From aerospace and defense to pharmaceutical, automotive, and electronics manufacturing, BioGene Conditioning Chambers meet the needs of organizations seeking reliable, high-performance environmental testing solutions. Whether you require custom-built chambers or standardized designs, our solutions are crafted to meet international quality benchmarks and industry-specific testing protocols.

ELECTRICAL PANEL

All Power Connectors, Protection Devices, Power Control Logic will be Built In The Control Panel Integrated To The Chamber.
All electrical functional circuits are equipped with their own safety device that shuts down the relevant circuit or the entire test chamber if a fault develops.
Bio Gene Controlled Conditioning System Training Keeping in views the point of maintenance and smooth operation of the controlled conditioning system will onsite Training of personnel for operation of controlled conditioning system, refrigeration system and programming through controller will be provided for 7 days.

STANDARD PROTECTIONS

Protective Features Provided As Follows :-
Over load Trip & Earth Leakage Trip For Complete Chamber.
Mcb's For Compressors, Heaters And Motors; Over load Trip For Compressor, Heaters And Motors; Bimetallic Over Temperature Cut-Off For Compressors; I !eaters will Be Cut-Off if Air Circulation Blowers Are Off.

SOFTWARE CAPABILITIES:

Bio Gene Conditioning Chamber with HMI is designed designed such that the temperature profile runs in manual as well as auto/programmed mode. Provision for Self test for trouble shooting.
Provision for modification of test profile temperature while test is in progress.
All test request and data will be store in hard disk and can be displayed for analyze and report generation while test is in progress.
Provision of displaying and printing temperature curves in different pages. Provision for zooming, expanding, retracting, select curve on/off, etc of temperature curves.

Bio Gene Conditioning Chamber with HMI equipment is prohibited for Testing or storage of flammable, explosive, volatile substances in the specimen.
Bio Gene Conditioning Chamber with HMI Sample testing or storage of corrosive substances.
Systems Testing or storage of biological samples.
HMI designed with Observation window for each door.
Dehumidification during heating
Bio Gene Conditioning Chamber has inbuilt Drain for condensate water.
Bio Gene Conditioning Chamber with HMI have Display resolution: 0.1 0C
Bio Gene Conditioning Chamber with HMI has One Port Holes-100 mm diameter with removable silicon rubber.
Condenser-Cooling is Air Cooled
Switch gear cabinet and control unit
Wide temperature & humidity range for flexible testing
±0.1°C temperature accuracy for reliable results
User‑friendly programmable interface
Real‑time data logging and remote access
Energy‑efficient design for long operational life

TEMPERATURE SENSER:

Bio Gene Conditioning Chamber with HMI is designed with chamber feeding through Electric panel which is separated from cooling equipment to prevent the water condensation on the electrical components.

AIR-CONDITIONING CHANNEL

Evaporators, drainage, and the dry to prevent.

The Conditioning will be Done By Air Circulation To Maintain Uniform Temperature By Means Of low Noise Fan By Externally Mounted Motors.

ADJUST FEET AND WHEEL

Adjust feet: 4 castors.

CONTROL PANEL

Bio Gene Conditioning Chamber with HMI is designed with automated operation with provision for manual over ride. The operation will be via touch screen using appropriate software (electronic software control compatible with Windows OS

RECORDER & PC CONNECTIVITY (OPTIONAL)

Provision for connectivity with PC for program editor/run/stop or Getting The Recording Of 'Temperature Cycle With Printer.
Standard Ethernet/USB Interface For Pc Connectivity will be Provided In the Chamber
Control software license along with Suitable instrument/pc/printer for monitoring, controlling and graphical representation of testing profile

TEMPERATURE LIMITERS

Independent Adjustable Temperature Limiter For Mini/Max Digital Setting.
Adjustable Max/Mini Temperature Limiter For Test Space with Visual And Acoustical Alarm Message and additional protection for high temperature limit protection. (OPTIONAL)
SHELVE 6 Nos
Bio Gene internal dimensions : 2000 mm (W) x 1500 mm (D) x 1500 mm (H) of clear unobstructed space for test Bio Gene Test chamber is designed with six Shelves for specimen storage.
Dimensional tolerances to limit within ±5%)
Machine inner space is capable to store 36 samples of diameter 200 mm length up to 1000 mm.
The total weight of the stores up to 175 Kg each Shelve.
Shelves and the condition system will be capable of holding 36 no. of such stores.
Port holes & shelf : Port hole of 100 mm diameter with removable rubber
bungs shall be provided - 2 Nos.
One on each wall i.e. LHS and RHS.
Shelf: SS Bar shelf - 5 nos. shall be provided to hold the trays. 5 nos.
Aluminum trays size (2000mm x 1500mm)

INNER CHAMBER

Bio Gene Controlled conditioning system Interior construction made of 18 SWG stainless steel 304 grade.

Internal construction material industry hinges and sensor mounts not corrode and

No joints and sharp edges inside workplace.

All the joints will be leak proof for prevention of air and water 'leakage.

Exterior body

Exterior body made of18 SWG Mild steel sheet with electrostatic powder coated finish.

Built in control panel provided on exterior body without any projection and All the hinges and door locks made of stainless steel.

CNC based made outer body With fine finishing joints without any projections of fixtures.

Appropriate airflow for homogeneous sample temperature.

Lift air tightness using suitable silicon seals.

Refrigerant: CFC free environmental friendly refrigerant.

Appropriate Compressor mounding to prevent noise and vibration.

All wiring to be done with suitable identification.

Electric panel separated from cooling equipment to prevent the water condensation on the electrical components.

Chamber has Internal Air Circulation, and all the heaters and cooling coils are located behind/below the false sheet of the chamber and outside the working space.

Test Space is welded vapor tight with rounded edges and with suitable shelf supports.

DOOR

Bio Gene Conditioning Chamber with HMI always provides door locking system having both hinged and sliding door as per requirement. And for safety purpose and experimenting purpose, The door is firmly locked by lever, thermal sealing to be ensured and Door opening and closing is manual and auto mode provision is optiona

Multi Pane Glass Window.

Bio Gene Controlled conditioning system provided with Double wall insulated comprising all the sub-systems for operation and Robust type chrome finished heavy duty SS hinges fitted on the right hand side of the chamber with front opening single door.

INSULATION: Glass wool 150 mm thick. All seals on the controlled conditioning system and door for leak proof will be of silicon rubber double gasket for hermetic sealing better quality rubber.

Bio Gene Controlled conditioning system provided with Full front opening double walled insulated double doors with glass window of 250 x 250mm and silicone rubber gasket -50 to +100°C temperature envelope as well as humidity envelope of 10-98% RH.

The door hinges and toggle type locking arrangement. Door micro-switch off all running functions in case of door opening.

Lockable Front Opening Left hinged, with a single door latch easy to open.

Viewing Glass is Properly Sealed To Avoid leakage And provided With Heating Provision To Prevent Condensation. Windows size (250x250 mm),

Bio Gene Controlled conditioning system Heating, refrigeration and humidity system controlled conditioning system provided with flame proof fittings.

Viewing window : 2 nos. viewing window of 250 mm x 250 mm with multi-panned safety glass. One on each door.

Defogger's will be provided with auto cutoff. Arrangement of light in the controlled conditioning system with control switch on the panel for easy viewing through the window.

Controlled conditioning

system flooring & drain : will be strong enough to withstand static pressure. Shall has necessary arrangements to drain out condensed water, out of the controlled conditioning system.

TRAY

BioGene Conditioning Chambers trays have a provision to slide inside and outside for the placement of the samples.

ILLUMINATION

Internal Light With External Control for monitoring purposes

KEY PARAMETERS

TEST ENVIRONMENTAL CONDITIONS

TEMPERATURE RANGE

Cabinet 1(Cold cabinet) specification: Lowest temperature with refrigeration system: (-)-50 to 100ºC.

Bio Gene Controlled conditioning system provided with electrical equipment mounted on the controlled conditioning system such as air circulation motor, inspection lamp, door limit switch, thermocouples etc shall be flameproof.

Heaters will be Fong cold portion and terminated in a flameproof junction box.

Make	Bio Gene
Model	BTI-TSC-45
Operating temperature range	-50°C to +100°C
Controlled conditioning system temperature range	-50°C (±1°C) to +100°C (±1°C)
accuracy	+1°C
Shelves l weight	175 Kg each.
Stored holding	36 Nos
internal dimensions	2000 mm (W) x 1500 mm (D) x 1500 mm (H)
SAMPLE
Diameter	200 mm
Length	up to 1000 mm
dimensional tolerances to limit within	±5%)
accommodate	up to 36 numbers
Cooling rate:	: 2°C - 10°C/Minute averaged from 100°C
Heating rate:	2°C - 10°C/Minute averaged from 0°C to 100°C
Relative Humidity	10% to 98% + 3%
RH in climatic range	I-25°C to +55°C
Low humidity	<3% f:3% RH
Power supply	3 phase, neutral earth 415 volts + 5%, 50 Hz AC