Applications
BIOGENE Humidity Chambers meet Photo stability studies in Pharma, Plastics, composites, Adhesives, Textiles. Cosmetic, Food & Beverages, Personal care Biomedical storage, life science, Electronics etc in compliance with ICH guideline Q1A along with state of art 21 CFR Part 11 software.
Feature
Bio-Gene Temperature and Humidity Chamber have:
- Temperature Range from 5°C to 60°C,
- Relative Humidity from 5% to 90 %RH ±3RH
- Touch Screen Type, Programmable Controller
- Dual Turbo Fan Circulation and Fluorescent Lamp
- Low Water Level Alarm System
- Built-In RS-485 Communication Interface
- Optional Temperature/Humidity Chart Recorder without Microprocessor/PID/Digital Control with touch-screen type controller provides precise temperature control from 5°C to 60°C, relative humidity control from 5% to 90 %RH, timer, alarm, auto-tuning and auto stat stop function
Programmable, 999 cycle large capacity program controller, various alarm function, self-diagnostic, high accuracy with 0.1%,
Built-In RS-485 Interface enables the chamber easily hook-up to personal computer
Silent Dual Turbo Fan motor circulate air and maintain uniforms temperature in the chamber and quiet operation and auto-defrost function
Safety and Convenience over temperature and current protection capability ensure user safety and adjustable sliding rack
Sliding Water Storage Tank and automatic water supplying device.
Control
- Standards : ICH-Q1AR2
- ISO,EN, CE, Electro magnetic
- MDD :- 93/42/EEC
- IEC 60068-2-38
- EN 61000-6-1 : 2001
- Electromagnetic Compatibility Directive (89)/336/EEC)
- EN: 60101, ISO, CE
Construction
- Touch Screen Type 5.7’/ 7.0”
- Double walled with PUF insulation of 80-150 mm
- Inner Chamber: Stainless Steel 304
- Outer Chamber: Mild Steel Powder Coated
- Danfoss Tecumseh CFC free cooling system with hermetically sealed compressor with temperature sensors
- Stainless steel Trays
- Inner Door: Full-length inner glass door
- WiFi & LAN based data Communication
- Fluorescent light (324 liters & above)
- Forced air circulation for uniform temperature
- Safety devices: Low & high temperature cut-off settable thermostats & high humidity cut-off device
- Audio/Visual alarms for deviations
- DATA LOGGING
data Logging up logs for Temp.& Humidity
RS232 Data Logger
Humidity Chamber - Technical Specification
Specification
| DESCRIPTION |
BTI-HC-171 |
BTI-HC-280 |
BTI-HC-420 |
BTI-HC-560 |
BTI-HC-840 |
| Temperature Range |
5°C to 60°C |
| Temperature Accuracy |
± 0.2°C |
| Temperature Uniformity |
± 1°C |
| Humidity Accuracy |
± 2% RH |
| Humidity Uniformity |
± 3% RH |
| Temperature Sensor |
3-wire RTD |
| Humidity Range |
5% RH to 90% RH |
| Humidity Stability |
±2% or Better |
| Humidity Sensor |
Capacitive |
| Interior Construction |
Stainless Steel 304 |
| Exterior Construction |
CRCA Powder Coated |
| Internal Door |
Glass sheet door with complete visibility of components |
| Option for Electrical Interface |
Standard connector |
| Trays |
SS 304 perforated |
| Electrical |
220 to 240 volts AC, 50 Hz single phase |
| Alarm |
Audio and visual |
| Dimensions (mm) |
505 x 415 x 830 |
570 x 550 x 875 |
700 x 640 x 900 |
700 x 700 x 1100 |
825 x 825 x 1200 |
| Capacity |
171 liters |
280 liters |
420 liters |
560 liters |
840 liters |
A Humidity Test Chamber is used to simulate and control temperature and relative humidity conditions to test how products, materials, and components perform or degrade under specific environmental stress. It's widely used in pharmaceuticals, electronics, automotive, packaging, and materials research industries.
A Humidity Chamber typically focuses on short-to-medium duration humidity and temperature testing for product performance and material evaluation, while a Stability Chamber is designed for long-term stability studies under controlled conditions, often following ICH guidelines for pharmaceutical shelf-life testing. Some chambers, like BioGene's, are built to serve both purposes.
BioGene Humidity Test Chambers typically operate within a temperature range of 5°C to 60°C and a humidity range of 5% RH to 90% RH, depending on the model — allowing testing across a wide variety of environmental conditions.
Humidity Test Chambers are used across pharmaceuticals, electronics, automotive, packaging, cosmetics, food, and materials research industries — anywhere products need to be validated for performance under varying humidity and temperature conditions.
BioGene chambers are designed to comply with ICH, ASTM, IS, and IEC standards, ensuring test results are accepted for regulatory submissions and international quality benchmarks.
BioGene Humidity Test Chambers typically offer temperature accuracy of ±0.2°C and humidity accuracy of ±2% RH, with uniformity levels of ±1°C and ±3% RH respectively, ensuring precise and repeatable test conditions.
Yes. BioGene offers Humidity Test Chambers in multiple capacities (such as 171L, 280L, 420L, 560L, and 840L), and custom sizes can also be developed based on specific testing volume and space requirements.
Yes. As a trusted Humidity Test Chamber Manufacturer, Supplier & Exporter in India, BioGene (Biotechnologies Inc.) supplies chambers to laboratories and industries both domestically and internationally, with full technical and after-sales support.
BioGene chambers include audio and visual alarm systems, overload protection, and programmable controllers to ensure safe, uninterrupted operation during long-duration testing cycles.
The right model depends on your required test volume (capacity), temperature/humidity range, industry compliance standards, and space availability. BioGene's team can help recommend the ideal chamber based on your specific application — feel free to contact us for guidance.
Related Products
