Surgical Autoclave Manufacturer

Bio Gene® SURGICAL AUTOCLAVE assures complete sterility by the process of using Damp heat steam penetrating evenly. Thus all Fungi, Spores, Bacteria Viruses gets inactivated dental surgical application confirm of surgical safety standard.

Bio Gene enhance the usage of same instruments due to its fine controlled programmable microprocessor which uses dedicated Software specially designed to carry out surgical Autoclaving.

  • Applications
  • Features
  • Control
  • Construction
  • Specification
  • Incomparably Safe, Reliable, Easy to Use, Portable, Durable & Cost-Effective too. 
  • For Hospitals, Nursing Homes, Clinics, Dentists, Surgeons, Camps, Pathology Labs, Laboratories, Naturopaths body Piercing, Tattooing and anywhere you need complete sterilization. 
  • Stainless steel Body.
  • Anti-bulging & fuel saver base for extra strength, fuel & time saving, anti-bulging lid for additional strength. 
  • ISI marked gasket made of food grade synthetic rubber for longer & better performance and hygiene. 
  • Fusible plug type safety valve and gasket release system (grs) for triple safety. 
  • Color-coded pressure gauge to indicate safe and danger zones. 
  • Weight type safety valve & pressure regulating device for better safety and reliability. 
  • Vacuum release & steam release valves made of stainless steel to avoid breakage & stile deposits. 
  • Handles & valve knobs made of very durable, heat resistant & fine quality Bakelite to avoid breakage. 
  • ISI marked heating element made of heavy pipe with better quality chrome plating for longer life, fitted with specially designed silicon rubber washer to protect from leakage around the element. 
  • Specially designed rubber cable (in semi-automatic autoclaves) capable of comfortably bearing the heating load. Special rubber material used to make it water, heat, wear & tear and electrical fault resistant. 
  • High quality 3-pin plug and element connector (plug) for better safety & easier extensibility of the cord. 
  • International quality timer (in semi-automatic model) for reliable performance & to avoid accidents.

The pressure inside our Surgical Autoclave is controlled through a semi automatic, which controls the pressure inside the chamber and cuts of the current from the heater whenever the pressure exceeds the set pressure value of the autoclave, thus making it very safe and energy efficient.

Seamless construction ensures bacteria free environment. The unit is fitted with pressure guage, safety valve (weighted) pressure release valve & rubber gasket for seamless/leak proof fitting.

Electric/Non electric.

  • More than 40 different Models, Widest Range of Sizes to match different requirements. 
  • Available in Non-Electric, Electric and Semi-Automatic too. 

Surgical autoclave is Single walled units. The inner chamber is made of heavy gauge stainless steel sheet of ss-304 grade.

Autoclaves The strong lid constructed out Stainless steel sheet of Stainless Steel -304 grade has a double safety radial locking arrangement, which ensures an easy and smooth opening and closing operation for all Surgical autoclave are ideally suited for hospitals and research labs where safety is the first priority of the users, since it is equipped with a double safety steam release valve. At the same time we test all our autoclaves for up to 2.5 times the standard working pressure to ensure maximum safety and protection from any unfortunate incident. All our Portable autoclave is supplied complete with pressure gauge, pressure release valve and stainless steel basket as a standard feature.

Surgical Autoclave as per the international standards and guidelines our surgical autoclaves have a working temperature of 121
ºC. However for specific requirements our autoclaves can be upgraded to be used for up to 134ºC.

Surgical Autoclave Working pressure for our standard model surgical autoclave is 15 psi, however this can be upgraded to be used for higher pressures of up to 30 psi.

Surgical Autoclave Normal pressure range of our autoclave is 12 to 21 psi.

Technical Matrix For Lab
Temperature Sensor PT 100
Basket 1
Temperature range 115ºC-121ºC
Temperature Controller Microprocessor Based Programmable Controller
WORKING PRESSURE 12 to 21 p.s.i
INNER CHAMBER Stainless Steel Sheet
Heat Load 2 KW/ 3KW/ 4KW/ 6KW
Nominal Voltage 220-230 Volts, 50Hz Single Phase
SIZE 250 x 450mm 300 x 500mm 350 x 550mm 400 x 600mm 450 x 600mm
An ISO 9001Certified EC, EU